Sale!

1400W MPPT Wind Solar Hybrid Boost Charge Controller 12V 24V apply for 800W 600W wind turbine generator +600W 400W solar panels

$165.00 $148.50

7145 in stock

SKU: 32248057404 Category:

Description

Rlated Products

600W Wind Turbine Generator 48V or 24V with 1700mm super Rotor 100% enough-power output generator Max 850W wind power generatorUSD 367.20-383.40/piece

Wind Turbine Generator with built-in controller rectifier module – DC output 400W 300W Wind Generator CE RoHS ApprovedUSD 241.20-259.20/piece

400W Maglev Wind Turbine Generator 200W 300W 400W Vertical Axis wind generator high efficiency low noise Maglev wind turbineUSD 299.88-358.68/piece

600W wind generator MAX 830W wind turbine+1400W MPPT hybrid charge controller for 800W wind turbine generator+600W solar panelsUSD 377.60/piece

1m/s low wind speed start 400W AC three phase wind turbine generator 6 blades 12V 24V wind generator 400W wind turbine windmillUSD 176.80/piece

600W Wind Turbine Generator & 1000W Boost MPPT Wind Solar Hybrid Charge Controller for 600W wind generator and 400W solar panelsUSD 347.65/piece

HOT 2018 power 600W 5 blades wind generator / wind turbine / windmill CE Approved wind turbine generator Max 830W outputUSD 294.40/piece

400W wind generator MAX 600W wind turbine+1000W MPPT hybrid charge controller for 600W wind turbine generator+400W solar panelsUSD 314.10-323.10/piece

Technical Parameters Details

Model

800W Wind & 600W Solar
<Boost MPPT>
800W Wind & 400W Solar
<Boost MPPT>
600W Wind & 400W Solar
<Boost MPPT>

System Rated Voltage

12V / 24V Auto-work

Solar Panel PV Modules

Power

600W 400W 400W

Wind Turbine Generator

Power

800W 800W 600W
Charging

Max. Current

80A 65A 55A

Average Filling Protection

14.4V±1% / 28.8V±1%

Float Filling

13.8V±1% / 27.6V±1%

Average Filling Recovery

13.2V±1% / 26.4V±1%

Temperature Compensation

-24mV/℃ / -48mV/℃
Discharging

Disconnect (dc)

10.8V±1% / 21.8V±1%

Recovery (dc)

12.3V±1% / 24.6V±1%

Over

Voltage

Cut Off (dc)

16V±1% / 32V±1%

Recovery (dc)

15V±1% / 30V±1%

Idle Current (dc)

≤0.1A

Voltage Drop (dc)

≤0.5V

Control Mode

Maximum Power Point Tracking—MPPT (Charging Efficiency 30% higher than original PWM Type)

Booster MPPT Charging

Yes ! very well solve the low charging efficiency problem of the low wind speed

Display Parameters

Voltage, charging electric current, storage battery power

Display Way

big-size LCD
Protection Type Lightning protection; Solar reverse charge protection; Battery open-circuit protection; Battery reverse protection; Over wind speed and over-voltage soft automatic brake protection; Overload protection; etc.

Cooling Mode

radiator

Environment Temperature

-25℃~+55℃

Use altitude

≤5500 m (2000 m above the need to reduce power use)

Step-less Unloading Function

when high wind or the generated wind power is beyong the scope of battery / loads absorptoins, the controller can immediately start-up unloading to protect whole system

Net Weight

2.34KG (containg the 0.92Kg unloading resistance)
Shape Dimension

Boost MPPT Wind Solar Hybrid Controller: 165*140*64mm Unloading Resistance: 240x110x63cm

!!! clik the link into your needed other model to directly order !!!

Wind Solar Hybrid Charge Controller

Application Voltage Click to order
Wind Turbine Power PV Solar Panel Power
  300W 200W 12V/24V Auto-work link
400W 300W link
500W 300W link
500W 400W link
500W 500W link
600W 300W link
600W 600W link
800W 600W link
  800W 400W 12V/24V Auto-work link
600W 300W link
500W 300W link
400W 200W link
300W 300W link
300W 150W link

Operation Instructions


Status Indication

Button Instruction

Button 1: Press this button to enter setup interface or switch setup program;

Button 2: Click this button to switch down on page views, in the setup interface, it is used to reduce the parameter values, step 0.1V;

Button 3: Click this button to switch up browsing on page views, in the setup interface, it is used to increase the parameter values, step 0.1V;

Button 4: Click this button to exit the setup interface, and save the parameters.

LCD Screen (the default interface)

To the user in accordance with the specifications, general automatically entered into the following interface

on behalf of the display Battery Voltage at this time, digital is the Battery Voltage Readings;

represents the current day (if it is night, the icon into);

represent the charging and discharging, for charging, having the current will show effect; when there is no current or current is very small, the label will disappear; For discharge, when the battery is in the state of under-voltage, flashing the overall effect, when the battery is in good state, according to static effect, marking can pick up the load, after loading, if there are current, will display effect.

on behalf of the solar panels, power generation according to the sun;

on behalf of the battery, the number of inside represent the current battery capacity;

on behalf of the load, the load output will be lighting effects under the condition of display;

on behalf of the fan, the wind will come, the animation will be shown.

Parameters to browse

User press down key to view the fan charging current “Ifan”, the solar charging current “Ipv”, press the up button to return to the interface of a parameter.

The above three pages, collectively known as browse pages, when a minute don’t operating controller buttons, LCD back-light will automatically go out, after pressing any key will once again lit back-light and continuously for one minute.

Parameter Settings

Press Enter key, the controller into the parameter set interface, as the following showss, “Vfloat” represent this time can be set to float charging voltage value, the user can press or key numerical, each time you press the increase or decrease 1V, set up finished, the user can press the ESC key to exit to browse the first page, can also continue to press Enter to switch to the next project, operation method as belows:

The controller can be set to Float charging pressure point “VFloat”,under-voltage point “Vunder”, over-voltage point”Vover”,fan unloading point “Vfan_breaking”,the operation method is the same as the first item.

Wide Application

We Deserve Your Turst

Service promise: this machine is repaired without paying a fee within a year, lifelong maintenance. Exceeding the deadline or being damaged during transporting or artificial damage or natural disasters damage caused by irresistible factors is not in the list of the warranty.

Additional information

Over-voltage Protection

Yes

Open Circuit Protection

Yes

Over-wind Protection

Yes

Over-load Protection

Yes

Warranty

2 Year Free Maintanence

Battery Reverse Protection

Yes

Solar Anti-charging Protection

Yes

Maximum Current

80A

Brand Name

IHUAX.CN

Model Number

Boost MPPT Wind Solar Hybrid Charge Controller

is_customized

Yes

Application

Charger Controller,Voltage Controller,Solar System Controller,Wind Controller,Solar Working Station,Lighting Controller,Other

Reviews

There are no reviews yet.

Be the first to review “1400W MPPT Wind Solar Hybrid Boost Charge Controller 12V 24V apply for 800W 600W wind turbine generator +600W 400W solar panels”